The laminated bumper is very sturdy and protects both the building than the trailer.
They are use to receive a traffic frequent trailer.
They are secured by inking or hot spot. They are made from recycled tires.
Bumper laminated with steel front plate is very sturdy and protects both the building than the trailer.
They are use to receive a traffic intense trailer.
They are secured by inking or hot spot. They are made from recycled and covered with a plate of steel 3/8 ” tires.
Molded bumper is robust and protects both the building than the trailer.
They are use to receive a traffic trailer moderate.
They are secured by inking.
They are manufactured by injection into a mould.
The most economical way to form a seal airtight between the trailer and the building.
For standard openings of 8′ X 8’h for standard size trucks.
As the model 101 except that the head is adjustable, so after the trailer is remote, you can adjust the head with the height of the trailer.
For 8 ‘ X 10’h openings.
Allows you to make a tight seal air with openings 9 ‘ in height and more.
These cushions are equipped with 4 ” flexible foam.
For 8 ‘ X 10’h openings.
This type of cushion head bends and rises to accommodate the trailer.
For 8 ‘ X 10’h openings.
A 26 HSS tube frame gauge galvanize.
This rigid shelter provides a sealing all around for many sizes of trailers.
For 10 ‘ X 10’h openings.
This patented unique design eliminates wear lying normally on standard truck shelters.
May be part of a system of automatic loading dock.
For openings of 10 X 10 h.
This model is made for a difficult approach entry.
The mobile wall gives a seal all the way round.
For 10 ‘ X 10’h openings.
Is designed for side loading for a train.
For 10 ‘ X 10’h openings.
Is the best solution to avoid damaging the building. For trailers of standard sizes.
For 8 ‘ X 8’h openings.
The most effective way to seal the passage between a building and a train.
Available in 4 different sizes.
10′ X 10’h opening.
The unique process of sealing this model provides a perfect seal for a trailer that is not parked in the Center, a trailer in angle or portfolio.
For 10 ‘ X 10’h openings.
Is a very good way to make many sizes of trailer and do not cause damage to the building.
For 8 ‘ X 10’h openings.
The MH30 offers one of the largest horizontal doors 12 “beyond the front of the wharf.
Corrosion protection including generous zinc coating and hardware pivot points.
Takes trucks with bars ICC 8 “to 26” above ground level.
Retainer arm made of steel solid 1 “.
Double signs for the driver. Holding force is 35 lbs.
Minimal need for maintenance and lubrication.
The ML10 offers you one of the largest horizontal doors 0 “to 12” beyond the front of the wharf.
Corrosion protection including generous zinc coating and hardware pivot points.
Takes trucks with bars ICC 11 “to 29” above ground level.
Retainer arm made of steel solid 1 “.
Double signs for the driver. Holding force is 30 lbs.
Minimal need for maintenance and lubrication.
Nominal capacity of 30 lbs to 80 lbs.
1 control push button.
Automatic activation of a lip bevel with hydraulic assistance.
Protects foot on each side. Fuse safety anti-effondrement limiting the free fall in month 3 “.
Hydraulic system to service continues with a 1HP outdoor ventilation (TEFC) motor. UL/CSA approved electric components.
Nominal capacity of 30 lbs to 50 lbs.
1 string to be pulled to activate the Center plate.
Automatic activation of a lip bevel with mechanical assistance.
Protects foot on each side.
Positioning system reliable friction reducing bouncing and providing instant support. The mechanical device anti-effondrement prevents dropping of the platform.
Lomaster of Blue Giant platforms are available in many sizes and with a capacity of 20 lbs as standard.
Remotely with hose power unit hydraulic 12 “, three-phase, standard voltages.
Hydraulic pump with integrated discharge valve.
Hoist limit switch. Protects foot Telescopic 8 ‘ on stationary models.
Any point of turning are fitted with bearings lubricated for life maintenance-free. Precision safety fuse to prevent free falling of the platform.
Complies with ANSI MH29.1.
MD – CH hydraulic ramp and lip operated by means of two hydraulic cylinders without maintenance.Command push button single nema 4.
Motor 115/230/575 volt 1HP. Lower than the floor service 5 “high and 5” door.
25 lbs at 30 lbs.
MD – CM
ramp and lip activated by means of a system of balanced spring.
Plate access for smooth transition. Comfortable handle.
Lower than the floor service 5 “high and 5” door. 25 lbs at 30 lbs.
